Filter
Top Products
134 HP Photosmart M305/M307 User’s Manual
Recharging NiMH Batteries
NiMH batteries can be recharged in the camera when the
camera is connected to an optional HP AC power adapter or
HP Photosmart M-series dock. NiMH batteries can also be
recharged with the optional HP Photosmart battery quick
recharger. See Appendix B: Purchasing Camera Accessories
on page 139.
When the HP AC adapter is used to charge the batteries and
the camera is off, the Power light on the back of the camera will
blink during charging. When the dock is used, the dock light
will blink. When the quick recharger is used, the light on the
quick recharger will be red.
The following table shows the average time it takes to recharge
NiMH batteries that have been fully discharged, depending on
where the batteries are being charged. The table also notes the
signal you will see when the batteries have been recharged.
Where batteries
are charged
Average
charge time
Signal when charging has
completed
In camera with
HPAC power
adapter
connected
12 to15 hours If the camera is off, the
power light on the camera
stops blinking and turns off. If
the camera is on with the
Image Display on, the
icon appears.
In camera while
camera is in the
dock
12 to 15 hours Power light on the dock stops
blinking and turns on solid.
In HP quick
recharger
1 hour for 2
batteries
About 2 hours
for 4 batteries
Light on quick recharger
turns on solid green.