Filter
Top Products
4 - 15
Message
Cause/condition for
message to appear
Troubleshooting
Error has occurred.
Error code No. ××××
Please read the manual.
(4-digit alpha-numerals
showing the code of trouble
will appear in ××××.)
Error has occurred.
Please reinsert a disc.
Error has occurred.
Please restart.
Error occurred.
Please replace disc or format
disc
Error occurred.
Please replace disc.
ERROR ××××
(4-digit alpha-numerals
showing the code of trouble
will appear in ××××.)
Finalize may not be
complete.
Finalize again now?
YES NO
Found error in image file.
Repair disc now?
YES NO
It is unrecordable on this
card.
Appears if the self-diagnosis function of
the DVD video camera/recorder has
detected a serious problem when power
was turned on, or the same trouble
occurred three consecutive times in
modes other than recording.
Appears if, when power was turned on,
the self-diagnosis function of the DVD
video camera/recorder detected a slight
trouble that can be fixed: See “4-4 Self-
Diagnosis Function and
Troubleshooting” for details.
Appears if, when power was turned on,
the self-diagnosis function of the DVD
video camera/recorder detected a slight
trouble that can be fixed by turning
power on again: See “4-4 Self-Diagnosis
Function and Troubleshooting” for
details.
Appears if repair has failed with DVD-
RAM disc after message “Data error in
all image file. Repair all data now?” or
“Found error in image file. Repair data
now?” appeared.
Appears if repair has failed with DVD-R
disc after message “Data error in all
image file. Repair all data now?” or
“Found error in image file. Repair data
now?” appeared.
Appears if the self-diagnosis function in
the DVD video camera/recorder detects a
serious problem during recording, or
when the same trouble occurs three
times consecutively during recording.
Appears if accident, such as power off,
occurred during finalizing, and then
power was turned on again or disc was
reloaded.
Appears if repair has failed after
message “Data error in a part of image
file. Repair disc now?” appeared.
Appears when a card other than SD
memory card or MultiMediaCard was
loaded.
Take note of the 4-digit alpha-
numerals in ××××, and refer to “4-4
Self-Diagnosis Function and
Remedy”.
Set the power switch to “POWER
OFF”, press the DISC EJECT button,
and then reinsert the disc. After that,
set the power switch to “VIDEO” or
“PHOTO (disc)”.
Set the power switch to “POWER
OFF”, reconnect the AC adapter/
charger or battery, and then set the
power switch to “VIDEO” or “PHOTO
(disc)”.
Initialize the disc (deleting all
recorded data), or replace the disc.
Replace the disc.
Take note of the 4-digit alpha-
numerals in ××××, and refer to “4-4
Self-Diagnosis Function and
Troubelshooting”.
Choose “YES” and designate it to
finalize the disc.
Choose “YES” and designate total
repair (automatic repair) of video file.
Choosing “NO” will display a message
for verifying initialization. [Refer to
*3 on page 4-11]
Insert an SD memory card or
MultiMediaCard.
Troubleshooting > Messages and Troubleshooting