Filter
Top Products
4-8-2a How to remove disc - DZ-MV1000E(UK)
If the disc cannot be ejected after performing “4-8-1 Items to be checked”, remove it using the
procedure in this section.
Information:
Numbers in diagrams are step numbers of setting procedure, and letters in brackets [ ] show the
types of screw.
1) Turn the hood in the direction of the arrow
to remove it.
2) Remove three screws [A], and then remove
the filter piece, being careful not to scratch
the lens surface with screwdriver at this
time.
3) Remove the lens cover in the direction of the
arrow.
4) Use a fine-tipped flat-bladed screwdriver,
etc. to move the lock arm in the direction of
the arrow, and then open the disc cover.
Information:
When reinstalling removed components, use
the reverse procedure to removal.
Fig.3-1-1 How to remove disc
[A] M1.7x4 (Black)
Lock arm
Disc cover
1)
Filter
piece
Hood
Lens
cover
2) [A]
3)
4)
4 - 41a