Filter
Top Products
4 - 26
4-5-2 System reset procedure
1) Set the power switch to “POWER OFF”, and
then disconnect the battery or AC adapter/
charger.
2) Use a fine tipped pen, etc. to hold down the
RESET button for approx. 2 seconds.
4-5-3 Procedure for resetting camera functions
1) Connect the battery or AC adapter/charger.
2) Set the power switch to “VIDEO” and place the DVD video camera/recorder in the recording
pause status; loading disc is not necessary at this time. For the following steps, operate the DVD
video camera/recorder while viewing the LCD monitor or viewfinder.
3) Set the quick mode switch to “OFF”.
4) Press the MENU button to display the camera setting menu screen.
5) Use the joystick to choose “Initial Setup”, and then press the center of joystick.
6) Use the joystick to choose “Reset”, and then press the center of joystick: The screen for verifying
reset will appear.
7) Use the joystick to choose “YES”, and then press the center of joystick: Reset will be executed.
8) After reset, press the MENU button to close the camera setting menu.
Fig. 4-5-1
RESET
Troubleshooting > System Resetting/Resetting Camera Functions
Item
System
reset
Camera
function
reset
Default at
factory
Setting range Remarks Memo
Brightness
Color Level
Beep
Power Save
Record LED
Language
Demo Mode
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Center
Center
On
Off
On
English
Auto
On, Off
On, Off
On, Off
English, French, Spanish,
German, Italian
Auto, Off, Start
+
+
LCD Setup
Initial Setup