Filter
Top Products
6 - 5
6-1-4 Settings when Creating Reference Data
When the connections for creating reference data are complete, set the DVD video camera/recorder
and test equipment as follows:
1) Make sure that no disc or card is inserted: Neither is necessary when creating reference data.
2) Set the power switch to “VIDEO” and quick mode switch to “OFF”: After that operate the DVD
video camera/recorder while watching the LCD monitor screen.
3) Press the MENU button to display the menu screen.
4) Use the joystick to choose “Initial Setup”, and then press the center of joystick.
5) Use the joystick to choose “Reset”, and then press the center of joystick: The screen for verifying
reset will appear.
6) Use the joystick to choose “ENTER”, and then press the center of joystick: Reset will be executed.
7) When reset is complete, operate the joystick by the above procedure to set the items on menu
screens as follows:
a) Specify Demo Mode “Off” in Initial Setup menu. Failing to specify Demo Mode “Off” will
interfere with adjustment.
8) Press the MENU button to restore the normal display.
Information:
The following table shows the menu status after the above settings:
The settings for Date Setup are not shown in the table below, since they do not have any meaning
when creating reference data.
Item
Program AE
White Balance
EIS
Dig. Zoom
MIC Filter
16:9
VIDEO Mode
Quality
Input Source
(*1)
PHOTO Input
(*1)
Self Timer
OSD Output
Setting
Auto
Auto
On
×40
Off
Off
FINE
FINE
CAMERA
Field
Off
Off
Item
Brightness
Color Level
Beep
Power Save
Record LED
Language
Demo Mode
Setting
On
Off
On
English
Off
Camera Functions Setup
Recording Functions Setup
LCD Setup
Initial Setup
Adjustment > Creating Reference Data
+
+
*1: Dispaly only on models that have the line
input function.