Filter
Top Products
4 - 18
Message
Cause/condition for
message to appear
Troubleshooting
Appears if a battery is used when
repairing video files. The specifications
state that video files can be repaired only
when the AC adapter/charger powers the
DVD video camera/recorder.
Appears if an attempt is made to copy
video to card. The specifications state
that no video is unrecordable on card.
Appears if a DVD-RAM disc that was
write-protected for disc units by software
disc-protect function is loaded, or if an
attempt is made to record on write-
protected disc.
Appears when an SD memory card
whose erasure prevention switch was
locked is loaded.
Set the power switch to “POWER
OFF” with the disc loaded, remove
the battery, and then connect the AC
adapter/charger.
[Refer to *3 page 4-11]
Stop trying to copy a video, or select
photos and execute copy.
Release the software disc-protect.
Unlock the erasure prevention switch
of SD memory card.
Note:
The listed messages are subject to change without notice for improvement of performance.
Troubleshooting > Messages and Troubleshooting
Use AC adapter/charger.
Turn off power.
VIDEO scene cannot be
copied to card.
Write protected.
Check disc.
Write-protected.
Check card.