Filter
Top Products
5 - 3a
1)
Filter
Piece
Hood
Lens
cover
2) [A]
3)
[A] M1.7x4 (Black)
(2a) Hood, Filter Piece and Lens Cover (DZ-MV1000E)
1) Turn the hood (a) in the direction of the
arrow to remove it.
2) Remove three screws [A], and then remove
the filter piece (b), being careful not to
scratch the lens surface with screwdriver at
this time.
3) Remove the lens cover (c) in the direction of
the arrow.
Fig. 5-3-2a Hood, Filter Piece and Lens Cover
Information:
Since user cannot replace the DZ-MV1000E(UK) lens cover, the lens cover cannot be removed
unless the filter piece
(*1)
is also removed.
*1: On DZ-MV550E it is not necessary to remove the filter piece when removing the lens cover.
Disassembly and Reassembly > Disassembly