Filter
Top Products
4. In the same manner insert a roll of
film in the upper compartment.
5. Make sure that the black side of the
leader paper faces up.
6. Gently pull out some of the leader
paper, pulling it over and around the
pressure plate. Then insert the tip of
the leader paper into the slot of the
take-up spool.
7. Gently rotate the take-up spool in
the direction of the arrow until the start
mark of the film is aligned with the start
mark on the spool clip (36).
k The above step is to be completed
before the roll-film insert is placed into
the camera.
24