Filter
Top Products
2. Attach the PD Prism Finder to the
camera body.
3. Turn the aperture ring of the lens so
that the exposure meter coupler (35) of
the lens and the aperture ring coupling
pin (A) of the PD Finder engage.
+
Be sure to check for proper coupling.
If the aperture ring coupling pin (A) is
not properly seated in the fork of the
exposure meter coupler (35), use a pen
(or similar device) to push the aperture
ring coupling pin into its proper position
into the fork.
4. Pull out and turn the ASA dial (B)
until the appropriate ASA number
appears in the window.
*Always set the AM Lever on the lens
to “A”, otherwise correct metered ex-
posure cannot be obtained. For the
same reason, do not touch the
Depth-
of-field Preview Lever when making
an exposure measurement.
ASA
DIN
6400
(39)
(5000)
l
(38)
(4000)
l
(37)
3200
(36)
(2500)
l
(35)
(2000)
l
(34)
1600
(33)
(1250)
l
(32)
(1000)
l
(31)
800
(30)
(650)
l
(29)
(500)
l
(28)
400
(27)
(320)
*
(26)
(250)
l
(25)
200
(24)
(160)
l
(23)
(125)
l
(22)
100
(21)
(80)
l
(20)
(64)
l
(19)
50
(18)
(40)
e
(17)
(32)
l
(16)
25
(15)
36