Filter
Top Products
0 Insertion of the Film Insert
1. Grasp both sides of the release
latch (37) of the film insert, making sure
that the film type index (42) is not upside
down, and place the film insert straight
into the camera body. After the film
insert has completely entered the
camera body, let go of the release
latch.
2. Press in on the outer edges of the
release latch (indicated by the arrows
in the photograph above) and the roll-
film insert will lock into place. (If the
roll-film insert does not go all the way
in on the right-hand side, turn the film
advance crank slightly while pushing
in on the right side of the film insert.)
3. After insertion has been completed,
securely close the camera back cover.
*
If the film advance crank moves
slightly from the time the film insert is
placed into the camera to the time the
back cover is closed, there will be no
ill effects. However, if the film advance
crank moves too much, the first frame
will be fogged.
26
0 Memo Clip
The memo clip found on the camera
back cover can be used to hold the
film box top.
*
The memo clip also doubles as a
safety lock to prevent the camera back
from accidentally opening. If exces-
sively thick paper is placed in the memo
clip, it will no longer simultaneously
serve as a safety lock.