Filter
Top Products
1. Remove the battery chamber cover
by rotating it counterclockwrse with
the aid of a coin.
2. The underside of the battery cham-
ber cover bears a + mark. Be sure to
have the + marks of battery and cham-
ber cover face each other as the bat-
tery is inserted. Then securely retighten
battery chamber cover
*Wipe battery with a soft cloth before
inserting into battery chamber, as a
soiled battery may fail to make, or
maintain, proper contact
*When the finder is not used for a
long period of time remove the battery
and store it in a cool, dry place.
*Never throw used batteries into a
fire, or attempt to charge a battery.
0 Method of Use
1. Attach the CdS Prism Finder to the
camera body.
2. Turn the aperture ring of the lens so
that the exposure meter coupler (35)
and aperture ring coupling pin (A) of
the CdS Prism Finder engage.
*Be sure to check for proper coupling.
If the aperture ring coupling pin (A) is
not properly seated in the fork of the
exposure meter coupler (35) use a pen
(or similar device) to push the aperture
ring coupling pin into its proper position
into the fork.
*Always set the AM Lever on the lens
to “A”, otherwise correct exposure can-
not be obtained. For the same reason,
do not touch the Depth-of-Field Pre-
view Lever when making an exposure
measurement.
40