Filter
Top Products
Menu
113
Item
Display
mode
Description of settings
ZEBRA DETECT 1
P2
TAPE
(Camera) Selects the brightness level of the left-leaning zebra patterns on the screen.
50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%
ZEBRA DETECT 2
P2
TAPE
(Camera) Selects the brightness level of the right-leaning zebra patterns on the screen.
50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%, OFF
<Note>
• The zebra patterns do not appear if you select OFF.
MARKER
P2
TAPE
(Camera) Select ON to display the marker. (Page 43)
ON OFF
• To display the marker, press the ZEBRA button.
SAFETY ZONE
P2
TAPE
(Camera) Sets SAFETY ZONE to ON or OFF.
OFF , 90%, 4:3
VIDEO OUT OSD
P2
TAPE
(Camera)
(MCR/
VCR)
Select ON to output the information displayed on the screen together with the
signals from the VIDEO IN/OUT jack.
ON OFF
<Notes>
• When a tape is used for recording, no on-screen displays (OSD) will be output
while recording is underway even when this function has been set to ON.
However, OSD will be output to the 1394 output during recording standby. If
OSD is not required, set the function to OFF.
• If this option is set to ON when performing backup recording while a tape is
used, the OSD will be output to the 1394 output at all times except when the
unit is in the recording mode.
Bear in mind that the OSD may be recorded inadvertently if backup recording
is performed when a setting other than OFF is selected for the 1394
CONTROL option (page 115) on the OTHER FUNCTIONS screen.
DATE/TIME
P2
TAPE
(Camera)
(MCR/
VCR)
Sets whether to display the date and time on the screen and whether to output
from the VIDEO IN/OUT jack.
OFF:
The date and time are not displayed.
TIME:
The time is displayed.
DATE:
The date is displayed.
TIME&DATE:
The time and date are displayed.
• If you select any setting other than OFF, the date and/or time are included
in the output signals regardless of the VIDEO OUT OSD setting. (The OFF
setting can be selected also using the remote control. (Page 76))
LEVEL METER
P2
TAPE
(Camera)
(MCR/
VCR)
Select ON to display the audio level meter.
ON OFF
indicates the factory setting.
DISPLAY SETUP screen