Filter
Top Products
94
Screen displays (continued)
REC END :
End of recording search
x
/x (x /x ):
Variable-speed search (Reverse variable-
speed search)
33 Media information display
The card slot where the P2 card was inserted
and the basic information of the media are
displayed here.
12
lights:
P2 card on which data can be recorded.
12
lights green:
P2 card on which data is to be recorded.
12
flashes:
Card recognition underway.
:
No card inserted.
P: Write-protected
F: Full memory
X: Cannot recognize
E: Card with a folder structure error (becomes
normal if formatted)
34 Special recording display
This display appears when the REC
FUNCTION option of the setting menu
RECORDING SETUP screen is set to
INTERVAL, ONE SHOT or LOOP, and when
PRE REC is set to ON.
35 Monitor sound volume level meter
When you press the PAGE/AUDIO MON/VAR
button, the sound volume output from the built-
in speaker and headphone jack is displayed.
36 Safety zone
The range of the zone is indicated by the
SAFETY ZONE item (page 113) on the
DISPLAY SETUP screen.
Warnings
COPY INHIBITED
Can not record correctly because of the input
signal copy-guarded.
EXTERNAL 1394 DISCONNECT
When the 1394 CONTROL item of the OTHER
FUNCTIONS screen of the Setup menu is set to
EXT and recording without connecting external
units with 1394 terminal, this display appears.
INCOMPATIBLE CARD
The card cannot be used since it does not
comply with the specified standard.
RUN DOWN CARD
The end of the P2 card service life has been
reached. We recommend that you replace the card.
Recording and playback can be performed even
when this warning is displayed. However, a warning
will be displayed when this P2 card is inserted into
a P2 device and when recording is finished.
DIR ENTRY NG CARD
The card has a folder structure error. It cannot be
used for special recordings (interval recording,
one-shot recording and loop recording). A warning
will be displayed when this P2 card is inserted
into a P2 device and when recording is finished.
FORMAT ERR !
This card is not compliant with the P2 standard.
INCOMPATIBLE TAPE
Can not use because the tape is not the standard
for this unit (e.g. a tape for saving data).
LOW BATTERY
No operations can be performed since the
battery charge is low.
UNPLAYABLE TAPE (OTHER FORMAT)
Can not playback because of the different tape
format.
UNABLE TO A. DUB (LP RECORDED)
Can not perform dubbing because the tape was
recorded with LP mode.
<Thumbnail operations>
CANNOT ACCESS
Cannot access clips.
CANNOT DELETE
Cannot delete clips.
CANNOT FORMAT
Cannot format P2 cards or SD memory cards.
CANNOT REPAIR Cannot repair clips.
CARD FULL
The P2 card does not have enough free space
for recording.
4:3 This indicates the position
which is cropped to 4:3.
90% This indicates the range
(90%) in which signals can be
displayed by an ordinary home-
use TV set.