Panasonic AG-HVX200AP Camera Accessories User Manual


 
Displays
93
20 Focus control display
Displays the focus control information with
99-00.
In the auto focus mode, AF appears. In the
manual focus mode, MF appears. When the
display is set to macro control, the black and
white of AF or MF are displayed in reverse.
95 (Focal distance: infinity)
:
00 (Focal distance: approx. 5 cm)
Depending on the zoom position, the macro
range may not be enabled. Also, depending
on the zoom position, the lower limit value of
macro range may be different.
The units can be switched between feet and
m in the ZOOM•FOCUS option of the setting
menu DISPLAY SETUP screen.
21 INDEX/MEMO/MARK IN recording display
This display lights when the USER button to
which the INDEX/MEMO function has already
been allocated is pressed while recording and
the index/memo signals are recorded.
It blinks when the USER button is pressed
before recording. (Index/memo signal recording
standby status)
22 Recommended ND filter
The recommended ND filter under the current
shooting conditions is displayed here.
23 ND filter display
ND filter selected is displayed.
When [ND--] is displayed, the ND filter may be
out of alignment. (OFF, the position except 1/8,
1/64)
Check the position of the ND filter switch.
24 Gain display
Displays the gain value of the image amplifier
configured. (During the auto mode, AGC is
displayed.)
When the CAMERA DATA option on the setting
menu DISPLAY SETUP screen is set to ON,
the value of the gain used during shooting is
also displayed during playback using tape.
25 AWB operation display
The white balance operation is indicated here.
26 AWB information display
Displays the information of white balance.
ATW: When ATW is set
P3.2K/P5.6K: In the case of preset
Ach/Bch: In the case of A/B
LOCK: When ATW is locked
27 Displays marker
During shooting, pressing the ZEBRA button
once or twice will display the marker.
28 Optical Image Stabilizer (
) display
[
] also appears during tape playback as
camera data when images were shot in the
optical image stabilization mode if ON was
selected under CAMERA DATA of the setting
menu DISPLAY SETUP screen.
29 Scene file name display (in camera mode)/
DUB display (in dubbing mode) (Pages 55
and 87)
30 Remaining battery charge
As the remaining battery charge drops, the
display changes as follows:
When the battery has completely discharged,
( ) blinks.
(When the AC adapter is being used, a display
other than
may appear: this is not a sign
of malfunctioning.)
31 Media remaining memory display
There is no display while the remaining
memory is being calculated. Also, the remaining
memory is not displayed during slow playback
using tape. “LOOP” is displayed during Loop
recording (LOOP REC).
32 Operational state display
REC : Recording
PAUSE : Recording pause
: Play pause
STNDBY :
Standby (the cylinder-head is stopped)
A. DUB
:
Standby for dubbing record
A. DUB
:
Dubbing record
: Play
( ) :
Fast-forward/Fast-forward play
(Rewind/Fast-backward play)
( ) :
Slow play (Reverse slow play)
CHK : Rec check
( ) :
Cue (reverse cue)
( ) :
Frame-by-frame (Reverse Frame-by-frame)
BLANK :
Blank search
(Continued on the next page)