Filter
Top Products
24
The CLOCK SET value is recorded in the contents
(clip), and affects the sequence of playback of the
thumbnails. Before carrying out recording, be sure
to check and set CLOCK SET and TIME ZONE.
This shows you how to adjust the calendar to 5:20
PM on December 25, 2005.
1 Set the POWER switch to ON. (Page 20)
2 Press the MENU button.
3 In the setup menus, OTHER FUNCTIONS
screen, TIME ZONE, set the time difference
from Greenwich mean time using the
or
operation button. (Page 117)
(Example of MENU in the TAPE mode)
Operation button
SET
MENU
• For menu operation (Page 97)
• You can also use the menu buttons on the
remote control. (Page 15)
4 In the setup menus, OTHER FUNCTIONS
screen, CLOCK SET, select YES.
5 Press the or operation button to set
YEAR to 2005.
Choose a year between 2000 and 2030.
Setting the calendar
6
Press the operation button to move the
setting item to MONTH.
7 Press the or operation button to set
MONTH to DEC.
8 Set DAY, HOUR, and MIN using the method
shown in steps 4 and 5.
• This is a 24-hour clock.
9 Press MENU three times to exit the menus.
• The clock can vary in accuracy so check that the
time is correct before shooting.
• When using the camera overseas, do not set
the CLOCK SET option to the current time, but
instead enter the time difference from Greenwich
mean time according to TIME ZONE.