Filter
Top Products
22
Using the LCD
1 Set the POWER switch to ON.
2 Press the OPEN button in the direction
shown by arrow
to open the LCD.
It can open out to 120 degrees. Do not try
to open it further as this will damage the
camera.
3 Position the LCD monitor where it is easiest
to see.
• The monitor can be rotated 180° toward the
lens and 90° toward you.
• Do not apply unnecessary force to the
open LCD. This can damage the camera.
• Ensure the LCD is fully closed.
• Both the LCD and viewfinder come on when
you have rotated the LCD to face in the same
direction as the lens for self-portrait shooting.
Viewfinder (continued)
Emphasizing outlines
Emphasizing the outlines of the images you see
in the viewfinder or on the LCD makes it easier to
focus.
Emphasizing the outlines does not effect the
images you shoot.
1 In CAMERA mode, press EVF DTL.
• “EVF DTL ON” appears on the screen for
about 2 seconds.
EVF DTL button
Press EVF DTL again to return to the original
display. “EVF DTL OFF” appears on the screen for
about 2 seconds.