Filter
Top Products
48
TAPE
Finding specific scenes
(image search)
STILL ADV
PAUSE
STILL ADV
INDEX
SELECT
STOP INDEX
MULTI/
P-IN-P
REC A.DUB
PLAY
VOL +
-
While in the shooting standby mode, you can
search through any images you have shot.
This is useful when you want to find a point from
which to continue shooting so two scenes come
one after the other.
Camera
Remote control
or
1 Press or in the shooting standby
mode.
The tape plays forward or backward while you
are pressing the button.
2 Release the button when you find the point
you are looking for.
The camera returns to shooting standby mode.
• The scenes may not connect smoothly for certain
recording states.
Index recording
When you press the USER button to which the
INDEX/MEMO function has been allocated at
any point during shooting or recording, the index
signals are recorded if a tape is being used. When
the same USER button is pressed in shooting or
recording pause mode, recording standby status is
established for the index signals. The index signals
are recorded when shooting or recording is started.
You can conduct searches (index searches) during
playback by recording these signals. (Page 76)
Shooting techniques for different targets (continued)
Pre-recording (PRE REC)
This function is used to record pictures and sound
starting at a fixed time (approx. 3 seconds for HD
recording or approx. 7 seconds for 480i recording)
before the time when the actual recording has
been set to start.
When recording to a P2 card, making the settings in the RECORDING SETUP screen (page 107) enables
special recording functions such as Pre-recording, Interval Recording, One Shot Recording, and Loop
Recording.
These special recording functions can be used only when the settings below are established.
• OPERATION TYPE item (page 101): VIDEO CAM
• Recording format: 1080i/60i, 720P/60P, 480i/60i, 1080i/30P, 720P/30P or 480i/30P
Recording start
operation
Recording stop
operation
Actual
recording time
Pre-recording
time
(Time)
Using the special recording functions
P2