Filter
Top Products
110
VQT3U98
Refer to page 30 for how to set up the Menu.
Camera Setup
≥ Switch to manual mode. (l 46)
Preferred camera setting information can be saved to each scene file. Switch the scene file in
accordance with the recording conditions.
1 Touch [CUSTOMIZE SCENE].
2 Touch the scene file.
≥ The scene file will switch by touching [SCENE1] to [SCENE6].
≥ Touch [EXIT] to exit the menu screen.
3 (To change the setting of the scene file)
Change the setting of the camera setting menu.
≥ Following settings for camera setting menu can be stored. (l 111 to 114)
j[DETAIL LEVEL]
j[V DETAIL LEVEL]
j[DETAIL CORING]
j[CHROMA LEVEL]
j[CHROMA PHASE]
j[COLOR TEMPA ch]
j[COLOR TEMP B ch]
j[MASTER PED]
j[AUTO IRIS LEVEL]
j[DRS]
j[GAMMA]
j[KNEE]
j[MATRIX]
j[SKIN TONE DTL]
≥ Changed settings of the camera setting menu are saved in the scene file.
Default setting of the scene file
≥ This function’s default setting is [SCENE1].
≥ It is possible to switch the scene file by touching to while displaying the operation
icons. (l 78)
≥ It will return to the default settings when [SCENE] is selected in [INITIAL SET]. (l 130)
Menu
Using the Menu
: [CAMERA SETUP] # desired setting
[CUSTOMIZE SCENE]
[SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]/[SCENE6]
MENU
[SCENE1] Setting appropriate for standard recording
[SCENE2] Setting appropriate for recording considering the characteristic of fluorescent
lamps (indoors, etc.)
[SCENE3] Setting appropriate for recording with modulation in resolution,
color shade, and
contrast
[SCENE4] Setting appropriate for recording with wider gradation in dark area (dusk, etc.)
[SCENE5] Setting appropriate for recording as a cinema with high contrast
[SCENE6] Setting appropriate for recording as a cinema with high dynamic range
SCN1
SCN6
HDC-Z10000P-VQT3U98_mst.book 110 ページ ２０１１年１０月４日 火曜日 午後３時２分