Panasonic HDC-Z10000P Digital Camera User Manual


 
54
VQT3U98
Perform Iris/Gain adjustments using the iris ring.
Adjust it when the screen is too bright or too dark.
Switch to Manual Mode. (l 46)
1 Press the IRIS A/M button to switch to Manual Iris Mode.
disappears.
The gain is displayed in dB.
2 Adjust the iris by rotating the iris ring.
Iris/Gain value:
CLOSE
!#
(F11 to F1.6)
!#
OPEN
!#
(0dB to 30dB)
Value closer to CLOSE darken the image.
Value closer to 30dB brighten the image.
When the iris value is adjusted to brighter than OPEN, it changes to the gain value.
To return to Auto Iris Mode, press the IRIS A/M button.
If the gain value is increased, the noise on the screen increases.
Depending on the zoom magnification, there are iris values that are not displayed.
When the [3D/2D REC MODE] setting is changed, this unit goes into standard Auto Iris
Mode ( ).
Recording
Iris adjustment
IRIS A/M
MNL
F4.0
A Gain value
B Iris value
C Auto iris icon
*
* It is displayed in Auto Iris Mode.
1 IRIS A/M button
2 Iris ring
HDC-Z10000P-VQT3U98_mst.book 54 ページ 2011年10月4日 火曜日 午後3時2分