Filter
Top Products
125
VQT3U98
Display relating to lens can be switched. (Zoom Display, Optical Image Stabilizer, Focus
Display, White Balance, Iris, Gain, Auto Iris, Shutter Speed, 3D Macro)
Display can be switched between the remaining recordable time of the SD card and the
remaining battery capacity indication.
Display which remains displayed even when [USER BUTTON DISPLAY], [GUIDE LINES],
[SAFETY ZONE], [DATE/TIME], [LEVEL METER], [CONVERGENCE], [LENS STATUS] and
[CARD&BATTERY] are set to [OFF] can be switched.
Detected faces appear with frames.
≥ Up to 15 frames are indicated. Larger faces and faces nearer to the center of the screen
take preference over others.
∫ Prioritized face framing
Prioritized face framing is displayed as orange frames. Focus and adjustment of brightness
will be performed against the prioritized face framing.
≥ Prioritized face framing is only displayed with Portrait Mode in the Intelligent Auto Mode.
≥ The white frame is for face detection only.
≥ In 3D Recording Mode, prioritized face framing is not displayed in following cases:
j3D display is set to 3D display or MIX display
jIt is set to R-Image
jDuring 3D display on a connected TV
≥ It cannot be set while in the Interval Recording is used.
[LENS STATUS]
[ON]/[OFF]
[CARD&BATTERY]
[ON]/[OFF]
[OTHER DISPLAY]
[ON]/[OFF]
[FACE FRAMING]
[OFF]:
Cancel the setting.
[PRIMARY]:
Only the prioritized face framing is displayed.
[ALL]:
All face detection framings are displayed.
HDC-Z10000P-VQT3U98_mst.book 125 ページ ２０１１年１０月４日 火曜日 午後３時２分