Filter
Top Products
138
VQT3U98
With a PC
Problem Check points
When connected by the
USB cable, this unit is
not detected by the PC.
≥ After re-inserting the SD card into the unit, reconnect the
supplied USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment. (l 97, 105)
≥ Connect the supplied USB cable again after restarting the
PC and turning on this unit again.
When the USB cable is
disconnected, an error
message will appear on
the PC.
≥ To disconnect the USB cable safely, double-click the
icon in the task tray and follow the instructions on the
screen.
Cannot see the PDF
operating instructions
for HD Writer XE 1.0.
≥ You will need Adobe Acrobat Reader 5.0 or later or
Adobe Reader 7.0 or later to read the PDF operating
instructions for HD Writer XE 1.0.
Others
Problem Check points
Item other than the
touched one is selected.
≥ Calibrate the touch screen. (l 26)
If the SD card is inserted
in this unit, it is not
recognized.
≥ If the SD card is formatted on a PC, it may not be
recognized by this unit. Use this unit to format SD cards.
(l 34)
The remote control does
not function.
≥ [REMOTE CONTROL] of the [OTHER FUNCTION] is
[OFF]. (l 31)
≥ The button-type battery of the remote control may be run
out. Replace it with a new button-type battery. (l 31)
HDC-Z10000P-VQT3U98_mst.book 138 ページ ２０１１年１０月４日 火曜日 午後３時２分