Filter
Top Products
121
VQT3U98
Change the lower setting of the built-in microphone (5.1 ch) according to your choice.
≥ Set the [MIC SETUP] to [SURROUND] or [ZOOM MIC]. (l 57)
≥ Normally set to [0dB].
≥ Select [+3dB] or [+6dB] to get strong power feeling at bass level.
≥ Set [MIC SETUP] to [2ch]. (l 57)
Distortion of the sound can be reduced when the built-in microphone (2 ch) or external
microphone is used by setting to [ON]. ( is displayed on the recording screen) It will
record with natural sound when set to [OFF].
≥ Adjust the audio control knobs (CH1/CH2) to adjust the audio input level.
Sets the input level of the external microphone connected to the audio input terminal 1 (XLR
3 pin).
Sets the input level of the external microphone connected to the audio input terminal 2 (XLR
3 pin).
[BASS SETTING]
[0dB]/[+3dB]/[+6dB]/[LOWCUT]
[2ch MIC ALC]
[ON]/[OFF]
[EXT. MIC GAIN1]
[-50dB]/[-60dB]
[EXT. MIC GAIN2]
[-50dB]/[-60dB]
HDC-Z10000P-VQT3U98_mst.book 121 ページ ２０１１年１０月４日 火曜日 午後３時２分