Filter
Top Products
72
VQT3U98
A graph with brightness as horizontal axis and number of pixels at that brightness as vertical
axis is displayed. It is possible to determine the exposure of the whole image by looking at
the distribution in the graph.
≥ To adjust the brightness, refer to page 54.
Switches the display method of the 3D video.
≥ These settings will not affect the images actually recorded.
≥ Set [3D/2D REC MODE] to [3D]. (l 36)
Press USER button or touch USER button icon.
≥ It will switch every time the button is pressed or the button icon is touched.
3D Display # MIX Display # 3D Display off
∫ To change to 3D display when in the Playback Mode
≥ Change the mode to and touch the play mode select icon.
Then, set [VIDEO/PICTURE] to [3D] or [PICTURE]. (l 72)
1 Play back the scene or still picture recorded in 3D.
≥ It is convenient to use Pause.
2 Press USER button or touch USER button icon.
≥ It will switch every time the button is pressed or the button icon is touched.
3D Display # 3D Display off
≥ This cannot be set when [3D OUTPUT] is set to [HDMI]. (l 74, 92)
Image displayed on the screen is switched to the image from the right lens when the 3D
display is turned off in the 3D Recording Mode. is displayed when displaying the video
from the right lens.
≥ Set [3D/2D REC MODE] to [3D]. (l 36)
≥ Set the 3D Display to off.
≥ The image displayed on the TV will not switch to the image from the right lens even if the
R-Image is set while the TV is connected.
Histogram
3D Display
3D Display: 3D video is displayed. is displayed.
MIX Display: The images of the left and right lenses are displayed overlapped
and is displayed.
3D Display off: The image from the left lens is only displayed.
R-image
3D
HDC-Z10000P-VQT3U98_mst.book 72 ページ ２０１１年１０月４日 火曜日 午後３時２分