Filter
Top Products
64
VQT3U98
Setting the Time Code
Time code will display the recording time in hours, minutes, seconds, and frames.
TC 00:00:00:00 (hour : minute : second : frame [NDF])
TC 00:00:00.00 (hour : minute : second . frame [DF])
≥ The frame (Number of frames counted every second) will vary depending on the
[REC FORMAT] setting. (l 115)
Select the compensation mode for the time code.
≥ It is automatically set to [NDF] when the [REC FORMAT] is set to [1080/24p] or the interval
recording is used.
Sets the way the time code will move.
* An error may occur when the playback mode is switched when the [REC FORMAT] is set
to [1080/24p].
≥ It is automatically set to [FREE RUN] when it is set to PRE-REC.
≥ The time code will reset when the built-in lithium battery is exhausted when it is set to
[FREE RUN].
Recording format Frame
[1080/60p], [1080/60i], [1080/30p], [PH], [HA], [HE] 0 to 29
[1080/24p] 0 to 23
[TC MODE]
: [RECORD SETUP] # [TC MODE] # desired setting
[DF]: Time code is compensated in accordance with the actual time. It
is mainly used for broadcasting such as TV programs.
[NDF]: It will not compensate the time code. (There will be a difference
from the actual time)
[TCG]
: [RECORD SETUP] # [TCG] # desired setting
[FREE RUN]
*
: It will constantly move.
[REC RUN]: It will move only when recording.
MENU
MENU
HDC-Z10000P-VQT3U98_mst.book 64 ページ ２０１１年１０月４日 火曜日 午後３時２分