Filter
Top Products
123
VQT3U98
Selects the brightness level of the right-leaning zebra patterns on the screen.
1 Touch [ZEBRA DETECT 2].
≥ Touch [SET].
2 Touch / to adjust settings.
3 Touch [ENTER].
≥ Touch [EXIT] to exit the menu screen.
≥ Zebra 2 can be displayed by pressing the ZEBRA button after setting. (l 76)
Displaying of the luminance level display marker can be switched.
≥ Marker can be displayed by pressing ZEBRA button when set to [ON]. (l 76)
≥ The range of the 3D guide display is switched in accordance with the screen size assumed
for playback. (l 41)
You can check if the image is level while recording motion pictures and still pictures. The
function can also be used to estimate the balance of the composition.
≥ The guidelines do not appear on the images actually recorded.
≥ When Focus Assist is set to on, the following occurs.
jThe guidelines are not displayed (these are displayed on the TV when this unit is
connected to TV)
jThe setting cannot be changed
Display of the range that can be displayed with the common household TV (safety zone) can
be switched.
≥ The safety zone is not displayed on the images that is actually recorded.
[ZEBRA DETECT 2]
[SET]/[OFF]
[MARKER]
[ON]/[OFF]
[3D GUIDE]
[MODE1]/[MODE2]
[GUIDE LINES]
[OFF]/ / /
[SAFETY ZONE]
[90%]/[OFF]
HDC-Z10000P-VQT3U98_mst.book 123 ページ ２０１１年１０月４日 火曜日 午後３時２分