61
VQT3U98
Adjusting the audio input level
∫ Adjusting the input level of the built-in microphone (5.1 ch)
≥ Set the [MIC SETUP] to anything other than [2ch]. (l 57)
1 Select the menu.
2 (When [SET]/[SETr ] is selected)
Touch / to adjust the microphone
input level.
≥ Touch to activate/disactivate ALC. When ALC is
activated, the icon is surrounded by yellow and the
amount of sound distortion can be reduced. When
ALC is disactivated, natural recording can be
performed.
≥ Adjust the microphone input level so that the last
2 bars of the gain value are not red. (Otherwise, the
sound is distorted.) Select a lower setting for
microphone input level.
3 Touch [ENTER] to set the microphone
input level and then touch [EXIT].
≥ is displayed on the recording screen when the ALC is turned on.
≥ When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom
rate.
≥ You cannot record with the audio completely muted.
: [RECORD SETUP] # [5.1ch MIC LEVEL] # desired setting
[AUTO]: ALC is activated, and the recording level is adjusted
automatically.
[SET]/[SETr ]: The desired recording level can be set.
MENU
A Center
B Front left
C Back left
D Front right
E Back right
F Microphone input level
HDC-Z10000P-VQT3U98_mst.book 61 ページ 2011年10月4日 火曜日 午後3時2分