Filter
Top Products
49
VQT3U98
∫ About the zoom speed
≥ The zoom speed will vary depending on how far the zoom lever is pressed or how fast the
zoom ring is rotated.
≥ Zoom speed of the sub zoom lever will vary depending on the setting of [SUB ZOOM].
(l 126)
≥ The zoom speed does not vary when operating with the wireless remote control.
≥ If you take your finger off the zoom lever during zoom operation, the operation sound may
be recorded. When returning the zoom lever to the original position, move it quietly.
≥ It can be focused approximately 1.2 m (3.9 feet) or further when the zoom magnification is
at its maximum.
≥ It can be focused approximately 30 cm (0.98 feet) or further in 3D recording mode, and
approximately 3.5 cm (1.4 q) or further in 2D recording mode when the zoom magnification
is set to 1k.
≥ The image may wiggle horizontally when zoomed during the 3D Recording Mode. This is
because the convergence point is controlled in combination with the zoom. It does not
indicate a fault.
≥ When switching to the [3D/2D REC MODE] setting, the zoom magnification will be set to
approximately 1k.
Utilizing the USER button
Digital zoom can be used by setting the USER button. (l 71)
≥ Please refer to page 67 for details about setting the USER button.
HDC-Z10000P-VQT3U98_mst.book 49 ページ ２０１１年１０月４日 火曜日 午後３時２分