Filter
Top Products
Operating Instructions
[For assistance : 1-800-272-7033] 25
Note
• The Network Camera is automatically reset after setting up the
Network Configuration.
• When the following message is displayed, the IP address seems to be
overlapped.
Verify the IP Address to the network administrator, and enter the correct
IP address.
Please click . And then, next screen is displayed.
If you want to open the Top Page, Click .
Refer Section 1.5.3 Confirmation of the Network setup after this
operation.
Note
• If the Top Page does not appear, setup of your computer is required
following Section 1.5.2 Setup the Computer.
• If you set DHCP, please click button in Section
1.5.1-4 to open the Top Page.
1.5.2 Setup the Computer
If the proxy server is not used, please go to Section 1.5.3 Confirmation of the
Network setup.
• When the proxy server is not used : The following setup is not necessary.
• When the proxy server is used : The following setup is necessary.
OK
OK
Open the Top Page