Filter
Top Products
Operating Instructions
40
• When you see the image of two or more cameras in Multi-Camera, it is
recommended to use Ethernet Switching Hub. If Ethernet Switching Hub is not
used, renewal of an image may become slow.
If the image of Multi-Camera does not displayed.
1.
Make sure the IP address of each camera setting and connection.
2.
Make sure the Multi-Camera setting of Setup Page.
3.
Make sure the each camera's proxy setting are removed.
Information
How to save the still image to computer
In the case of Single Camera and Multi-Camera mode
• Still images taken in Regularly Refreshed mode can be saved to
your PC.
Motion JPEG images cannot be saved. To save the image place
your mouse on the image and click the right button. In the window
that appears select "Save Picture As...". Assign picture a name and
save. It is recommended to set up the Interval time of Regularly
Refresh at 30 seconds or more.
In the case of Buffering Image mode
• It is possible to save the image to computer except for [Play] mode.
Please click the right button of a mouse on captured image which
you want to save, and select "Save Picture As...".