Filter
Top Products
Operating Instructions
[For assistance : 1-800-272-7033] 63
Note
Please do not overlap the IP Address setting.
Instructions for the data fields
*: Must be composed of four numeral characters (0 to 255) and delimited with 3
dots, such as 192.168.0.253. (Can not use "0.0.0.0" and "255.255.255.255")
**: Can not use [Space], ["], ['], [#], [&], [%], [=], [+], [?], [<], [>], [:] (only ASCII
character codes 33-126)
***: Can not use [Space], ["], ['], [#], [&], [%], [=], [+], [?], [<], [>] (only ASCII
character codes 33-126)
Digital Output Control
Digital Output Control screen allows you to set digital output control parameters.
• It is possible to set the digital output of I/O Connector.
1.
Click the button on the Network Camera Setup Page
screen. The next screen appears.
2.
When you select the button, Digital output terminal becomes high
impedance (open collector).
Enable • Please check this box when seeing the desired Network
Camera.
• The desired Network camera need to see its image on
Multi-Camera mode.
IP Address (or
URL)* or Host
Name***
Enter the desired Network Camera's IP Address or Host Name.
Camera Name** • Enter the desired camera's Name.
It is used only for the display of Multi-Camera.
Digital Output Control
Open