Filter
Top Products
Operating Instructions
82
The Network Camera
Image screen does not
appear.
1.
When Internet Explorer is used for a web browser, it is
necessary to download ActiveX program. Please set
Security Level of Internet Explorer as Low temporarily
(Tools menu Internet Options Security tab
Custom level ) and access it again.
(Since ActiveX program is saved in computer if it reads
once, you can return Security Level to previous setting
after you can check a display of an image.)
2.
When you change the IP address of Network Camera,
enter the new IP address in the URL of the browser.
3.
The Panasonic KX-HCM10 IP Camera can provide a
motion JPEG image to a maximum of 10 simultaneous
network connections. If an 11th user tries to connect, a
blue screen is displayed.
(A viewer image of buffering image is also the
simultaneous connection up to ten sets.)
4.
According to the status of the network, the web screen
does not appear quickly. Wait for a second.
• When Network Camera is accessed via a proxy,
please setup not to use a proxy. For details, please
refer to Section 1.5.2 Setup the Computer.
5.
Proper operation of the camera requires that "Active X"
is installed and operating properly. Today, most browsers
include this application. Verify if it is installed and
operating correctly. If no, please install Active X by the
following method.
• Double-click the "ocx\Reghcm10.exe" in CD-ROM
and a dialogue box is displayed.
• Click the "Register OCX (Active X)" button.
• Please wait for a while until the dialogue box of
"Succeeded!" appeared.
You do not remember
the IP address of the
Network Camera.
• Please check an IP address using attached CD-ROM.
Problem Cause and Remedy