Filter
Top Products
Operating Instructions
50
Image Transfer
Image Transfer screen allows you to set the Image Transfer parameters.
• It is possible to transfer the images to computer or Server, with mail or FTP
function.
• It is possible to set up the various trigger by setting up Timer or External Alarm.
Note
Since the Image Transfer mode uses the cameras internal clock, please make
sure the cameras clock setting have been configured. Please refer to Page 46
about Time Setting.
Click the Image Transfer button on the Setup Page of Network Camera.
The next screen changes with selected mode. The respectively screens are
displayed in Non transfer, Alarm, and Timer mode.
• Non transfer: Trigger setting is disabled. Refer to the following Non transfer
mode
• Alarm: Transfer in the Alarm Mode. Refer to Page 51.
• Timer: Transfer in the Timer Mode. Refer to Page 57.
Non transfer mode
• The image will not be transferred.
1.
Click the Image Transfer button on the Network Camera Setup Page.
The next screen appears.
Please select a trigger mode that you want. And if you want to disable the
Start Capture of Buffering Image at Single Camera Top View Image page,
please check Disable.
2.
Select the each parameter.