Filter
Top Products
Operating Instructions
[For assistance : 1-800-272-7033] 81
4.2 Troubleshooting
Problem Cause and Remedy
While setting with CD-
ROM, could not
succeed with Network
configuration setting.
1.
Please power supply is returned on.
2.
Please do not use to over the Router.
The Network Camera
Web screen does not
appear.
1.
When you change the IP address of Network Camera,
enter the new IP address in the URL of the browser.
2.
Make sure the Ethernet indicator is on.
Make sure the Hub indicator and the LAN card indicator
is on.
If any indicator is off, check the network connections.
3.
According to the status of the network, the web screen
does not appear quickly. Wait for a second.
4.
When Network Camera is accessed via a proxy, please
setup not to use a proxy. For details, please refer to
Section 1.5.2 Setup the Computer.
If web screen does not appear when you are doing
above contents, please press the CLEAR SETTING
button and setup again.