Filter
Top Products
Operating Instructions
42
2.4.1 Using the Functions
Go to Top Page
Top Page screen allows you to select the Top Page items.
1.
Click the button on the Network Camera Setup Page.
See the Network Camera Top View Image Screen.
Network
Network screen allows you to set the following Network parameters.
• You can set disable Network Configuration from Setup Program of CD-ROM
for network security.
• You can set up the Port No., Static/DHCP, Default Gateway, DNS, DDNS, MAX
Bandwidth Usage. (Network Setup items of this section are as same as Setup
items of CD-ROM.)
(6) Top View Image Image Resolution, Image Quality, Regularly Refresh
interval setting.
(7) Image Transfer Trigger: mode, time, method, buffering, mail & FTP
setting.
(8) Camera Setup White Balance, Power line frequency, Pan/Tilt/
Brightness setting.
(9) Multi-Camera Multi-Camera setting (up to 4 cameras)
(10) Digital Output Control Digital output setting (Open or Short to GND)
(11) LED Control Power LED Control setting. (ON or OFF)
(12) Restart Restart the Network Camera with all the parameters
preserved.
(13) Update Firmware Update Firmware setting.
(14) Reset to Factory
Default
Initialize all the parameters to the factory preset.
(15) Help Provides you with instructions about the commands
and functions of the Network Camera Setup Page.
No. Item Description
Go to Top Page