Filter
Top Products
Operating Instructions
62
Multi-Camera
Multi-Camera screen allows you to set the Multi-Camera parameters.
• It is possible to set the IP Address and Camera Name of Multi-Camera.
• When using Multi-Camera, setup is required.
1.
Click the button on the Network Camera Setup Page.
The next screen appears.
2.
Select the each parameter in the proper data field.
• To reset the current settings, click .
Then it returns to Setup Page, without saving setting value.
3.
When you have finished, click .
• The setting will be saved.
Power Line
Frequency
It can select the Flicker Correction by power supply frequency.
• 60Hz (default)
• 50Hz
Please select 60Hz in US.
Pan/Tilt Control
Brightness Control
You can lock the Pan & Tilt (including Pan Scan)/Brightness
Control.
Please select enable or disable.
If you select disable, it is displayed Locked on control bar
when you click these buttons.
Multi-Camera
Cancel
Save