Filter
Top Products
76
This executes functions or sets various settings of PENTAX PHOTO
Laboratory 3.
Tool Bar
Number Icon (button) Content
1
Open
This selects the image file for processing in
PENTAX PHOTO Laboratory 3. Only applies
when the software is started as standalone. This
cannot be used when PENTAX PHOTO
Laboratory 3 is started within the PENTAX
PHOTO Browser window. (p.79)
2
Save
This performs RAW file processing and saves it
with the specified save mode and image size.
(p.90)
3
Full Auto Processing
This appears when Full Auto Processing is set.
Performs processing using the processing
conditions set in the RAW file.
Click to select or from the pull-down menu.
Custom Processing
This is displayed when Custom Processing is set.
This performs processing using the processing
condition settings specified by the user. The
processing conditions are set using the White
balance panel, Tone panel, Other settings panel,
Lens aberration correction panel and Noise
Reduction panel. (p.84)
4
Recall Adjustment
When in Custom Processing mode, this recalls a
saved adjustment file. (p.92)
5
Save Adjustment
This saves the processing conditions set in
Custom Processing mode as an adjustment file.
(p.91)
6
Undo
When in Custom Processing mode, use this
function to cancel the previous operation. You
can undo up to five operations.
7
Redo
When in Custom Processing mode, use this
function to redo an operation that was cancelled
with the [Undo] button.
1 2 3 4 5 6 7 8 9 10 11 12