Pentax K-m/K2000 and smc PENTAX Digital Camera User Manual


 
159
Shooting Settings
6
Additional Settings for Shooting
White balance is the function for adjusting the color of an image so that
white objects appear white. Set the white balance if you are not satisfied
with the color balance of pictures taken with white balance set to F
(Auto), or to intentionally apply a creative effect to your images. The
default setting is F (Auto).
* The color temperature (K) is an estimate. This does not indicate precise colors.
1
Set the mode dial to e, K, b, c, or a.
2
Press the four-way controller (4) in Capture mode.
The [White Balance] screen appears.
Setting the White Balance
F
Auto
Automatically adjusts the white balance. (About 4000 to
8000K)
G
Daylight For use when taking pictures in sunlight. (About 5200K)
H
Shade
For use when taking pictures in the shade. It reduces the
bluish color tones in a picture. (About 8000K)
^
Cloudy
For use when taking pictures on cloudy days. (About
6000K)
J
Fluorescent
Light
For use when taking pictures under fluorescent lighting.
Select the type of fluorescent light, from D (daylight)
(about 6500K), N (neutral white) (about 5000K), and W
(white) (about 4200K).
I
Tungsten
Light
For use when taking pictures under light bulb or other
tungsten light. It reduces the reddish color tones in a
picture. (About 2850K)
L
Flash
For use when taking pictures using the built-in flash.
(About 5400K)
K
Manual
Use this to manually adjust the white balance according to
the lighting so that white objects appear as a natural
white.