Pentax K-m/K2000 and smc PENTAX Digital Camera User Manual


 
Before Using Your Camera
1
31
While shooting, the current settings can be checked on the status screen.
You can also switch the display to the control panel and change settings.
Following, how to set the JPEG Quality will be explained as an example.
1
Check the status screen and then
press the 4 button.
The control panel appears.
Press the M button when the status
screen is not displayed.
2
Use the four-way controller
(2345) to select an item you
want to change the setting for.
You cannot select the item that cannot be
changed.
3
Press the 4 button.
The setup screen of the selected item
appears.
Using the Control Panel
201/
5.6
F
123
OK
=sq\
AF.S
JPEG
AWB
ISO
AUTO
10
M
OFF
OFF
400
400
AF.A
JPEG
AWB
ISO
AUTO
10M
OFF
OFF
Flash Mode
Flash Mode
Auto discharge
Auto discharge
10M
AF.A
JPEG
AWB
ISO
AUTO
OFF
OFF
400
JPEG Quality
JPEG Quality