Filter
Top Products
53
Getting Started
2
When an Incorrect Language is Set
When you mistakenly select a language in the [Language/ ] screen
and proceed to the [Date Adjust] screen, you can perform the following
operations to set the correct language.
If you have proceeded to switch the camera to Capture mode (and the
camera is ready to take a picture), perform the following operations from
Step 2 to set the correct language.
1
Press the 3 button once to
display the guides on the
monitor.
The screen shown on the right is an
example of the guides displayed. The
displayed screen will vary depending on
the selected language.
The guides appear on the monitor for 3
seconds.
2
Press the 3 button once.
[A 1] is displayed in the upper tab.
H is displayed when the mode dial is set to H.
3
Press the four-way controller (5) five times.
[R 1] is displayed in the upper tab.
Press the four-way controller (5) six times when the mode dial is set to
H.
4
Use the four-way controller (3) to select [Language/
].
5
Press the four-way controller (5).
The [Language/ ] screen appears.
6
Use the four-way controller (2345) to select a desired
language and press the 4 button.
The [R Set-up 1] menu in the selected language appears.
Refer to the following pages and set the desired city for [Hometown]
and the current date and time as necessary.
•
To change Hometown: “Setting the World Time” (p.216)
•
To change date and time:
“
Changing the Date and Time and the Display
Style
”
(p.216)
P
P
ίυΈρθ
ίυΈρθ
ু൲Ⴚ
ু൲Ⴚ
2008/01/01
2008/01/01
00:00
00:00