Filter
Top Products
30
Before Using Your Camera
1
How to Change Function Settings
Function settings can be changed using the direct keys, the control panel
or the menu. The most frequently used function can be set using the direct
keys or the control panel; less common functions can be changed using
the menu. Some functions can be changed in more than one way (direct
keys and control panel or control panel and menu).
This section explains the basic ways to change function settings.
By pressing the four-way controller (2345) in Capture mode you can
set Drive Mode, Flash Mode, White Balance and Sensitivity. (p.76)
Following, how to set Flash Mode will be explained as an example.
1
Press the four-way controller (3)
in Capture mode.
The [Flash Mode] screen appears.
2
Use the four-way controller (45)
to select a flash mode.
3
Press the 4 button.
The camera returns to the status screen
and is ready to take a picture.
Using Direct Keys
0.0
0.0
0.0
Flash Mode
Flash Mode
Auto discharge
Auto discharge
Flash Mode
Auto discharge
OK
OK
OK
OK