Pentax K-m/K2000 and smc PENTAX Digital Camera User Manual


 
260
Appendix
12
Remote Control
PENTAX Remote Control F (optional) Release shutter
immediately or three seconds after pressing the remote control
shutter release button
Mirror Quick-return mirror, mirror up function (2 sec. self-timer)
Digital Filter
Toy Camera, High Contrast, Soft, Star Burst, Retro, Extract
color, Illustration, HDR, B&W, Sepia, Color, Slim, Brightness,
Custom
Custom Image
Image Tone (6 types), Saturation/Filter Effect, Hue/Toning,
Contrast, Sharpness/Fine Sharpness
Exposure Bracket
Three frames (underexposed, proper exposure and
overexposed) are shot continuously with exposure bracketing.
(Selectable between 1/2 EV and 1/3 EV for EV steps)
Exposure Meter/
Exposure Range
TTL multi (16-segment metering), Exposure range from EV 0 to
EV 21 at ISO 100, with 50 mm f/1.4 lens, Center-weighted or
Spot metering method can be set
EV Compensation
±3 EV (1/2 EV Steps), ±2 EV (1/3 EV Steps), EV Steps can be
selected
AE Lock
Can be assigned to the = button using the Custom Functions
(timer type: two times the meter operating time set in Custom
Setting) Continuous as long as the shutter release button is
halfway pressed.
Built-in Flash
P-TTL built-in flash with serial control, GN approx. 11 (ISO 100),
Angles of coverage: 28 mm lens angle of view (35 mm
equivalent), Flash synchronization speed range at 1/180 sec.
and slower, Daylight-sync flash, Slow-speed-sync flash, ISO
range = P-TTL: 100 to 3200, Auto-popup function
External Flash Sync
Hot shoe with M-contact, which couples with PENTAX
dedicated auto flashes, ISO range = P-TTL: 100 to 1600,
Automatic flash, Red-eye reduction flash function, High-speed-
sync and wireless-sync with PENTAX dedicated flash
Custom Function 21 functions can be set
Time Function World Time settings for 75 cities (28 time zones)
Shake Reduction
Function
CCD Image Sensor Shift, effective compensation range = up to
4 EV (dependent on the used lens type and shooting conditions)
Dust Removal
SP coating and CCD operations for dust removal. Can be set to
operate when the camera is turned on.
Power
Four AA lithium, AA Ni-MH rechargeable, or AA alkaline
batteries
Battery Exhaustion
Battery exhaustion symbol ? is lit. (The shutter is locked
when ? starts blinking.)
In/Out Port USB/Video terminal (USB 2.0 (high speed compatible))
Video Output Format NTSC/PAL