Filter
Top Products
CONNECTIONS
Basic connection for monitoring or recording
The peripheral devices (VCR, monitor, lens, etc.) and cables are
sold separately.
1 Make the video signal connection between the camera and
the monitor or timelapse VCR.
2 Power supply choices
• When using an AC 24 V power supply (UL listed class 2 power
supply), make the connections as indicated in Fig. 1.
• When using a DC 12 V power supply, make the connections as
indicated in Fig. 2.
CAUTION:
• To prevent camera and/or power supply failure, pay close
attention to polarity when making the connections.
• To prevent fire hazard any UL listed wire rated VW-1, should be
used for the 24 V AC cable input terminal.
3 Insert the plug of this power supply into a wall outlet.
The POWER indicator (A) will light. Adjust the picture on the
monitor using the Brightness and Contrast controls.
Coaxial cable type and maximum length
• Cable type RG-59U (3C-2V), 250 m maximum.
• Cable type RG-6U (5C-2V), 500 m maximum.
• Cable type RG-11U (7C-2V), 600 m maximum.
CAUTION:
• The RG-59U type cable should not be run through electrical
conduits or through the air.
• Use CCTV/Video-grade coaxial cable.
(Video signal connections)
: VIDEO IN
: VIDEO OUT
(A)
AC 24 V connection DC 12 V connection
GND
AC24V
GND
DC12V
Fig. 1 Fig. 2
+ –
+
DC12V
–
L53R4/US GB 1999, 12, 7
10 English