Filter
Top Products
USING THE MENU SCREEN SYNC/INT
SYNC settings
The following three types of synchronization settings can be carried
out.
A Internal synchronization (INT)
Generates a sync signal for internal camera use.
B Power supply synchronization (L - L: line-lock)
Matches the vertical sync signal for the camera with the
frequency of the AC power supply.
C External sync (VBS)
Matches the camera’s sync signal with the sync signal from an
external source.
A Internal synchronization setting (INT)
1 Press the SET button for about 3 seconds.
The MAIN MENU screen will be displayed.
2 Press the CURSOR (l, then d or c) button to change the
SYNC setting to “INT” (the setting will flash).
3 When finished:
Press the CURSOR (l) button until END is flashing at the bottom
of the screen, then press the SET button.
The display will return to the monitor screen.
MAIN MENU
LANGUAGE SET p
CAMERA ID OFF
SYNC INT
SET
SET
CURSOR
MENU END
L53R4/US GB 1999, 12, 7
18 English