Filter
Top Products
OPERATIONS USING THE SYSTEM CONTROLLER
C: Setting the SENSE UP and electronic shutter
1) If the SHUTTER setting in the camera’s main menu is set to
LONG or SHORT, you can change the SHUTTER SPEED setting.
• Press the ELS button, then press the “+” button to turn on the
electronic shutter.
• Press the ELS button, then press the “–” button to turn off the
electronic shutter.
2) If the SHUTTER setting in the camera’s main menu is set to
OFF, you can change the SENSE UP setting.
• Press the ELS button, then press the “+” button to turn on the
SENSE UP setting.
• Press the ELS button, then press the “–” button to turn off the
SENSE UP setting.
Note:
• If the SENSE UP zoom ratio setting has not been changed, then
the zoom ratio will be set to the factory default setting, which is
X8.
• If the MOTION setting is at ON, the electronic sensitivity (SENSE
UP) will not operate.
• If the SHUTTER item SHORT and LONG settings default values
have not been changed, the SHORT setting will be 1/100S and
the LONG setting will be X8.
D: Backlight correction settings
1) Turning backlight correction on
Press the BLC button then press the “+” button.
2) Turning backlight correction off
Press the BLC button then press the “–” button.
If the BLC setting has not been changed, then the mode will be
set to EVAL mode when the backlight correction is turned on.
E: White balance and AWC-LOCK settings
1) White balance lock
Press the AWC SET button.
2) Returning to the white balance mode previously active
Press the AWC RESET button.
L53R4/US GB 1999, 12, 7
English 61