Filter
Top Products
USING THE MENU SCREEN OPTION
OPTION settings
The following settings can be made from the OPTION menu.
A APERTURE setting:
This adjustment is used when you would like to correct outlines.
B AGC setting:
This automatically amplifies the image signal when filming in
slightly dark places so that the picture becomes brighter.
C GAMMA setting:
The GAMMA characteristics can be set to “1” or “0.45”.
D ZOOM setting:
A fixed mode and a variable mode are available. In fixed mode,
the zoom ratios are set to X2, X4 and X8. In variable mode, the
zoom ratio can be changed smoothly. Pan and tilt operations are
also available.
E MIRROR setting
The image can be rotated horizontally then vertically or vertically
then horizontally.
F RS-485 setting
You can set the communication parameters.
G INITIAL setting:
This returns all settings to the factory default settings (initial
values).
1 Press the SET button for about 3 seconds.
The MAIN MENU screen will be displayed.
2 Press the CURSOR (l) button to select the OPTION setting
“SET” (the setting will flash), and then press the SET button.
The OPTION MENU screen will be displayed.
MAIN MENU
LANGUAGE SET p
CAMERA ID OFF
SYNC INT
IRIS AI p
WHITE BALANCE ATW p
SHUTTER OFF
MOTION ON
OPTION SET p
SET
CURSOR
SET
OPTION MENU
APERTURE ON
p
AGC ON
GAMMA ON
ZOOM OFF
MIRROR OFF
RS-485 SET
p
INITIAL OFF
MENU BACK
L53R4/US GB 1999, 12, 7
English 49