Filter
Top Products
USING THE MENU SCREEN WHITE BALANCE/ATW
WHITE BALANCE setting
The following three types of white balance adjustment can be carried
out.
A Automatic color temperature tracking (ATW: Auto Trace
White balance)
This makes adjustments automatically so that the same colors can
be obtained even if the illumination level changes.
B Push-lock white balance (AWC: Auto White balance Control)
One-push automatic white balance setting is possible. This is used
mainly when the ATW setting does not reproduce faithful colors.
Refer to page 31.
C Manual white balance (MWB)
This lets you make fine adjustments to the color as desired. It can
be used when the optimum color reproduction cannot be
obtained by using ATW. Refer to page 32.
A Automatic color temperature tracking setting
(ATW)
1 Press the SET button for about 3 seconds.
The MAIN MENU screen will be displayed.
2 Press the CURSOR (l, then d or c) button to change the
WHITE BALANCE setting to “ATW” (the setting will flash).
3 When finished:
Press the CURSOR (l) button to select BACK (it will flash) at the
bottom of the screen. Then press the CURSOR (d or c) button to
change BACK to END, and press the SET button.
☞ To return to the previous screen, select BACK then press
the SET button.
MAIN MENU
LANGUAGE SET p
CAMERA ID OFF
SYNC INT
IRIS AI p
WHITE BALANCE ATW p
SET
CURSOR
MENU BACK
CURSOR
SET
MENU END
L53R4/US GB 1999, 12, 7
28 English