Sanyo VCC-6974 Security Camera User Manual


 
SPECIFICATIONS
Camera:
Scanning system
: NTSC standard TV system (525 TV lines,
30 frames/sec.)
Interlace
: PLL 2:1 interlace
Image device
: 1/3 inch solid state image device CCD
Picture elements
: 811 (H) x 508 (V)
Effective picture elements
: 768 (H) x 494 (V)
Synchronizing system
: Internal sync, Line lock sync switchable,
External sync
Resolution
: 470 TV lines horizontally, 350 TV lines
vertically
Video output level
: 1.0 Vp-p/75 ohms, composite
Video S/N ratio
: More than 48 dB
Minimum required
illumination
(incandescent lighting)
: Approx. 0.05 lux with a F 1.2 lens (32X
electronic sensitivity),
Approx. 1.4 lux with a F 1.2 lens (normal
mode)
Backlight compensation
: ON/OFF setting, Multi-zone light
measuring system (Active when using
an auto-iris lens)
Iris function
: Manual ON/OFF switching
Electronic iris range
: 1.4 lux to 70,000 lux (F 1.2, lens: color
mode)
2.0 lux to 100,000 lux (F 1.4, lens: color
mode)
Flange-back
: 12.5 mm ± 0.5 mm
White balance
: ATW/AWC/MWB setting
Electronic shutter
: 8 speeds, selectable by setting
SHORT: 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000,
1/10000 sec.
LONG: X1, X2, X4, X8, X16, X32
Electronic sensitivity
: AUTO/OFF, up to X32
Electronic zoom
: ON/OFF
Continuance, up to X8
Fix, X2/X4/X8
Pan/tilt operation
Motion detector
: ON/OFF
Alarm out: 2 pin terminal and RS-485
bus line
AGC
: ON/OFF
Gamma
: ON/OFF (γ = 1)
Mirror image effect
: H, V, H/V, 3 mode reverse image
Camera ID
: ON/OFF, up to 8 characters
Communication
: RS-485, operation via SSP
Lens mount
: CS mount (or C mount with the
supplied adaptor)
Environmental conditions
: Temperature: –10˚C ~ +50˚C
Humidity: less than 90% (no
condensation)
Power supply
: 24 V AC/12 V DC, 60 Hz
Power consumption
: 24 V AC :
3.7 W (with auto-iris lens)
3.1 W (without auto-iris lens)
12 - 15 V:
4.0 W (with auto-iris lens)
2.9 W (without auto-iris lens)
Weight
: Approx. 470 g (without lens)
L53R4/US GB 1999, 12, 7
English 65