Filter
Top Products
OPERATIONS USING THE SYSTEM CONTROLLER
Operations using the camera command
(CAMERA) button
1 Press the INDIVIDUAL button.
2 Press the MODE button to select CM.
3 Use the numeric buttons to enter the address (camera).
4 Press the ENTER button to accept the address, then use the
command buttons for subsequent operations.
A: Electronic zoom
1) Zoom (T, W) operations
Press the ZOOM (T) or ZOOM (W) button.
2) Setting and clearing zoom mode
• Press the ZOOM PRESET button then press the “–” button.
The zoom mode will be set and electronic zoom will be canceled.
• Press the ZOOM PRESET button once more then press the “+”
button.
Electronic zoom mode will be set.
3) Pan and tilt operations (operation in normal screen mode)
If the electronic zoom mode is set to ON, press the J (q, s or
t) button. The focus will return to the center of the screen when
the 0 button is pressed.
B: Iris level operations
If using a DC-type auto-iris lens, the iris opening can be controlled. If
using a video-type or manual-type auto-iris lens, no operation can be
carried out.
1) Lens iris opening
Press the IRIS+ button to open the iris, and press the IRIS– button
to close the iris.
2) Returning the iris to the initial opening setting
Press the IRIS+ and IRIS– buttons simultaneously.
3) Error information when using a video-type auto-iris lens or
when the camera iris setting is EI mode
An Error display will appear on the menu screen of the controller.
21
43A
EDC
B
L53R4/US GB 1999, 12, 7
60 English