Filter
Top Products
4
Chapter 4 Adjustments and Settings for Recording4-46
4-7-3 Setting the Marker Display
Use the MARKER page of the OPERATION menu to specify the
display setting for the various markers and to turn the mask function
which dims all areas except the markers on or off.
Follow the procedure below to select the marker display.
1 Set the DISPLAY switch to MENU.
2 Turn the MIC/MENU knob until the MARKER page appears, and
push the MIC/MENU knob.
The current setting of an item appears to the right of the item.
<MARKER> 3 TOP
MARKER : ON
CENTER : ON 3
SAFETY ZONE: ON 90.0%
EFFECT : OFF
ASPECT MODE: 4:3
MASK : OFF 50
VAR WIDTH : --
,