Filter
Top Products
4
Chapter 4 Adjustments and Settings for Recording4-22
1 Set the REAL TIME switch to SET.
2 Use the ADVANCE and SHIFT buttons to set the real time.
3 Set the REAL TIME switch to ON.
The real time is recorded in the VITC, and the user bits that were set
are recorded in the LTC.
By flipping the internal switch, you can enter the user bits in the VITC
and the real time in the LTC.
Refer to the Maintenance Manual for more information.
Displaying the user bits being recorded in the VITC
Set the DISPLAY switch to U-BIT and then press and hold down the
HOLD button. The user bits that are being recorded in the VITC are
displayed while the HOLD button is pressed.